Back to top
Send SMS Send Inquiry
Home » Products » Physics Instruments

Physics Instruments

Oersteds Law Apparatus
close
Oersteds Law Apparatus
HL- 096
For demonstrating the relationship between magnetism and magnetic effect of electric current flowing in a wire. Comprised of a magnetic needle with brass bearing supported by pivot mounted on a base and surrounded by a rectangle of copper rod fitted with terminals which is suitably connected to permit current to flow over or under the needle in either direction. Measurements are approximate.
Electrical Tuning Fork Meldes Apparatus
close
Electrical Tuning Fork Meldes Apparatus
HL- 0100
On study streamlined base with provision for horizontal or vertical use. Forks aremanufactured from
Cathetometer
close
Cathetometer
HL- 0101
H.L. Scientific Industries L- Shaped Cathetometer instrument is designed for use in the vertical and horizontal planes. The vertical guide bar is made of gun-metal and is of a special type. It rotates on ball centres having bearings and can be clamped in any position. The cast iron frame which support the vertical guide bar. Is fitted with leveling screws. Range either 50 cm or 100 cm erector tube which can be screwed.
Lee & Charlton Disc Apparatus
close
Lee & Charlton Disc Apparatus
HL- 0114
For determining the relative conductivity of thin layers of materials, it consists of cylindrical brass slab of 11cm dia and 10.5mm thick. On this rest a 4.5cm deep brass hollow cylinder (Steam Chest) of this same dia with inlet and outlet tubes for steam. A hole for thermometer is drilled radially in each, and the cylindrical brass slab is fitted with eyelets to enable it to be suspended by three strings from stout annular ring. The ring is held on a heavy Retort Stand complete as above with accessories but without thermometer.
e/m by Zeeman's Effect Apparatus
close
e/m by Zeeman's Effect Apparatus
HL-1292
Zeeman’s Effect Apparatus (i) Constant deviation spectrograph Calibration range: 4000 Å – 7000 Å, ± 10 Å (ii) Constant deviation spectrograph prism (μ= 1.71) (iii) Fabry-Perot Etalon. Glass plates size: 32mm; Clear aperture: 25 mm R/T= 80/20 + 5% (iv) Micrometer eyepiece. Range: 25 mm (Least Count: 0.01mm)..
Micrometer Slide Comparator
close
Micrometer Slide Comparator
HL- 056
Micrometer Slide Comparator For Direct measurements up to 50 mm in steps of 0.01 mm (0.001 cm) on a large micrometer head.
Laboratory Table
close
Laboratory Table
HL-3132
Product Details: Size :180x120x78 cm Material:MS Power: 50 Hz Product type :Table Voltage Approx: 300V
Chemical Balance
close
Chemical Balance
HL- 0115
Chemical balance has a lacquered brass beam engraved 50 scale divisions to each side. Each scale division represents 1/5 mg rider on the scale. The pillar is finished in lacquered with nickel plated fittings and detachable pans which are suspended from double hooks. Mounted on a sunmica wooden base with leveling screws housed in teak wood case, with front slider and panel doors.
Solid- State VSWR Meter
close
Solid- State VSWR Meter
HL-090
Our organization is giving an immeasurable range of VSWR Meter that is broadly demanded among clients. This meter is manufactured utilizing high grade essential material and cutting edge advances in congruity with the current business sector patterns. The meter offered by us is analyzed under the supervision of our quality inspectors. Moreover, to meet different requests of customers, this range is accessible in distinctive specifications.
Gouy's Method of Susceptibility Measurement of solids
close
Gouy's Method of Susceptibility Measurement of solids
HL- 058
Apparatus for Measurement of Susceptibility of Paramagnetic Solids by Gouy’s Method
Rising Table Capillary Tube App
close
Rising Table Capillary Tube App
HL- 0112
The apparatus comprise metal frame, on which four capillary tubes of 10cm. long and of different internal diameters are clamped with the help of small metal brackets. The 9mm. rod is also attached to metal plate, so that complete clamp can be held in any stand for determining the surface tension of liquid by capillary rise method. Its having a cast aluminium 4" dia table with adjustable stand. Maximum height capacity 12".
Nodal Slide Assembly
close
Nodal Slide Assembly
HL-0107
Nodal Slide Assembly Upright: Consists of a combination of Single & double lens holder on a mount rotating along the vertical axis. The combination lens holders are adjustable in height, and the single & twin lens holders can either be moved together by rack & pinion or relative to each other by sliding. These motions can be read by individual pointers on a mm scale.
Linear Expansion Apparatus
close
Linear Expansion Apparatus
HL- 0113
The linear expansivity of a material can be determined by the Pullingers apparatus. It consists of a hollow cylinder where the experimental rod is placed inside the cylinder. There are three opening in the cylinder. The upper and lower opening are used for steam inlet and steam outlet. The middle opening is used for placing thermometer which measures the temperature of rod. The spherometer is placed in a free end of the instrument which measure the increase in length of the rod. An electric circuit is connected with the instrument to find whether spherometer touches the rod or not.
Viscosity Apparatus Capillary Flow(Poiseuille's App)
close
Viscosity Apparatus Capillary Flow(Poiseuille's App)
HL-1001
Page    1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13


H. L. SCIENTIFIC INDUSTRIES
Bank Road, Opp. Sub Power House, Mohan Lal Building, 1st Floor, Ambala Cantt - 133001, Haryana, India
Phone :+918068344209
Fax :91-171-2643035
Mr. Yogesh Goswami (Managing Director)
Mobile :+918068344209
Mr Dheeraj Goswami (CEO)
Mobile :+918068344209
Paypal Trust Stamp
Product Showcase
Send SMS Send Inquiry